- Debunking Access Control Systems & Commercial Security Systems Myths - September 8, 2022
- Access Control & Commercial Security Systems in Las Vegas - September 1, 2022
- Why You Should Get Your Fire Sprinklers Inspected Regularly - August 26, 2022
Fires cause devastating effects–they damage valuables, property, and even take lives. Therefore, its essential that you have fire safety systems in place to ensure that in case a fire does inevitably happen to your commercial property, the risks are extremely low. Now that you’ve decided to have an updated fire alarm system, what options do you have? In general, there are three types of fire alarm monitoring systems, namely: ionization, photoelectric, and combination alarms. But what are the differences? Keep on reading to find out.
Ionization Fire Alarms
Ionization fire alarms are most suited for detecting flaming fires. Inside an ionization fire alarm is a small piece of radioactive material that sits between two electronically charged plates. The placement of this material causes a constant current of ionized air between the two plates. When smoke enters between the ionized current, it interrupts the current and sets the alarm off. These alarm systems are better for detecting fast, flaming fires.
Photoelectric Fire Alarms
Photoelectric fire alarms are the better option for detecting smoldering fires. The smoke that is produced by a slow flaming, smoldering fire is very different from a raging flame fire. A photoelectric fire alarm uses a beam of light that goes through a chamber away from a light sensor. When smoke enters the chamber, it reflects the light towards the sensor, and triggers the alarm to sound.
Combination Fire Alarms
Combination alarms have both ionization and photoelectric fire detecting technologies rolled into one. While this fire alarm type sounds like the best of both worlds, it actually isn’t. Combination alarms aren’t as great as one detection method or the other, compared to the single units. For maximum home protection, it might be best to have all types of fire alarms in your building.
Initiating devices are the equipment that activate the system in case of an emergency. These devices can either be manual or automatic.
If you have commercial properties in Las Vegas, Nevada, you should know how important it is to have safeguards in place in case something untoward happens to ensure everyone’s safety, as well as to protect your property. One of these safeguards is installing fire alarm systems in your building. Make sure your Las Vegas commercial building has adequate fire protection by choosing us as your fire safety provider today. At Sting Alarm, we offer fire protection services and more in Las Vegas.
If you’re looking to purchase a fire alarm for your Las Vegas-area building, look no further than Sting Alarm. We are a fire alarm installation company based in Las Vegas, Nevada. What sets us apart from other fire alarm retailers is our commitment to providing a wide selection of fire alarms for properties like apartment complexes, and larger commercial spaces. More specifically, we regularly outfit schools, hospitals, industrial buildings, and hotels with fire alarm systems.
When you hire us for your fire alarm system needs, we will immediately do a full inspection of your current fire alarm system. We will conduct an onsite assessment, review maintenance and warranty records, and conduct a variety of other tests that will determine whether your fire alarm system is in good condition or if it needs to be replaced or repaired. Interested in the services we offer? Don’t hesitate to reach out to us at (702) 885-3802 today.
About Sting Alarm
Sting Alarm is a premier security company that provides turnkey and custom security solutions for large businesses in Las Vegas. Since 2004, we have been trusted by casinos, large corporate campuses, and enterprise operations.